makerspet/oomwoo

Build a fully local, open-source robot vacuum with OOMWOO, a DIY project combining 3D-printed hardware, Raspberry Pi, and 2D LiDAR. It performs autonomous navigation and mapping directly on-device using ROS2, maintaining privacy by avoiding cloud reliance while integrating natively with Home Assistant.

View on index · View in 3D Map

Related repos

• Vacuum robot operation without cloud connectivity
• ROS2 autonomous navigation stack with Nav2, SLAM Toolbox, and localization for 2WD, 4WD, and Mecanum robots
• RKO-LIO provides robust LiDAR-inertial odometry that runs on diverse robotic platforms without requiring sensor-specific modelling.
• Humanoid robot with open-source hardware and software
• Lightweight LiDAR-inertial odometry and mapping on ROS 2
• Data platform for robotics and physical AI
• Compact open source 3D printable mobile robot
• Ecosystem for robot manipulation and navigation
• OpenVMP modular robot platform for universal walking, driving, and climbing.
• OpenAMRobot trains robots via human demonstration